Parts and their names
Front
Audio directionality
①
②
③
⑦
④
⑤
⑥
① Microphone unit
Collects audio.
As this is a unidirectional microphone, it mainly receives audio from the direction shown in
the illustration. Audio from all other directions will be collected at a much smaller volume.
Input audio from audio collection direction.
② Microphone ring
This ring prevents the microphone from rolling when placed onto a table. It can be
removed as needed or replaced with one of the included colored rings.
③ Charge indicator [CHG] (red)
Shows the charge status.
On: Charging
Off: Charging complete or the microphone is not set correctly on the charger.
Blinking: Charging error
⚫ The microphone may contain a dry-cell or deteriorated rechargeable
battery, or the battery may be absent. Make sure that the proper type of
battery is inserted.
⚫ The battery may be outside of the operating temperature range. Make sure
that the battery is within the operating temperature range.
12
Side
Back
⑧
⚫ If the charger cannot directly contact the microphone because
of an obstruction, the [CHG] indicator will remain off and the
[ERROR] indicator on the charger will either light up or blink. In
that case, remove any foreign matter that is obstructing the
connection and re-insert the microphone into the charger.
Front
(Battery cover removed)
⑨
⑩
⑪
⑫