Panasonic WX-ST200P Mode D'emploi page 23

3
Turn the microphone ON
If the microphone is currently OFF, turn the power
switch to ON. When the microphone and the
wireless receiver are connected via a cable, the
audio from the microphone will not be transmitted.
4
Pair the microphone to the wireless receiver
Make sure that the [POWER] indicator on the wireless receiver lights green, then press
for at least two seconds the [REG] button of the channel to which you want to pair a
microphone. Both the microphone and the wireless receiver will enter pairing mode
and pairing will start.
During pairing mode, the [PWR] indicator on the microphone and the [REG] indicator
of the channel whose [REG] button has been pressed on the wireless receiver will
blink orange.
If pairing is completed successfully, the [PWR] indicator on the microphone switches to
the normal status according to the remaining battery level (green, orange, or red), and
the [REG] indicator on the paired channel on the wireless receiver lights green for one
second and goes off.
⚫ If pairing could not be completed successfully, the [PWR] indicator on the
microphone will blink red.
Power indicator Register indicator
Register button
Power indicator
23