Cooking Using The Automatic Warm Up Function - AEG 66030K-MN Instructions De Montage Et Mode D'emploi

Cooking using the automatic warm up function

All of the cooking surface's four cooking zones can be adjusted to any
of nine settings, and are equipped with an automatic warm up func-
tion:
– ¿, lowest heat setting
– Ç, highest heat setting
– a, automatic warm up function.
When you select the desired heat setting using the
lector sensor panel, the cooking zone will operate at maximum power
for a certain period of time and will then automatically switch back to
the follow-on heat setting that has been set.
The length of time that the automatic warm up function operates de-
pends on the follow-on heat setting selected.
1. Touch the heat setting selector sensor panel
setting from ¿ to Æ. The heat setting that has been set will then be
displayed. After a period of 5 seconds, the a (=automatic warm up
function) will appear in the display in place of the heat setting. After
the warm up period has finished, the heat setting will once more be
displayed.
3
If you should choose a higher heat setting while the automatic func-
tion is in operation, e.g. from Á to Ã, the period of time that the warm
up function is in operation will be adjusted accordingly. If you select a
lower setting, the warm up period will end immediately.
You can cook using the automatic warm up function only if the cook-
ing zone is cold or moderately warm. If a cooking zone is already hot
when you switch it on (h indicator), the automatic warm up function
cannot be used.
All manuals and user guides at all-guides.com
heat setting se-
to set the desired heat
13