ShelterLogic 27274 Guide D'assemblage page 7

step 8
A. Insert 4 Spike Anchors (10431) at an angle through the holes in each foot.
B. Tie a loop into the end of a rope length. Feed the loop over the top of the rafter pole. Feed the other end of
the rope through the loop. Run the rope down the leg at least 12 inches and wrap the rope around the leg.
Feed the loose end over the rope.
C. Hammer a Heavy-Duty Stake Anchor (800140) at an angle into the ground. Take the loose end of the rope
and secure it to the anchor. Repeat these steps for the remaining legs on the canopy.
A
A
B
C
Page 7
B
Fig. 8
C
05_27274_0B