ShelterLogic 27274 Guide D'assemblage page 6

step 5
Lay the cover over the roof frame with the
grommet side parallel to the frame and facing
down. There should be an equal amount of
overhang on all sides.
See Figure 5.
step 6
Assemble the 4 Corner Legs using:
(1) 800216 Leg Pipe and
(1) 800105 Foot Plate
Assemble the 14 Middle Legs using:
(1) 800095 Common Pipe and
(1) 800105 Foot Plate
Align holes in Pipe and Foot Plate (A)
and secure with a 3 inch Bolt (800218) &
(00690) Nut. (B)
step 7
A. Working on one side of the roof frame, connect the Middle Legs and secure with 3 inch Bolts (800218) and
Nuts (00690). Let the other side of the roof frame rest on the ground.
B. Connect Corner Legs to the same side but do not secure with bolt yet.
C. Connect the Middle Legs and secure with 3 inch Bolts (800218) and Nuts (00690) to the opposite side.
D. Connect Corner Legs to this side but do not secure with bolt yet.
A
Fig. 7
B
Fig. 6
A
C
Page 6
Fig. 5
00690
B
800218
note:
Face all bolt
heads outward to avoid
damaging the cover.
D
05_27274_0B