White&Brown MAMBO DB 716 Mode D'emploi page 32

All manuals and user guides at all-guides.com
notice_DB716 25/04/06
Fig. 14
• It is possible to dose the steam outlet as you like by means
of the steam quantity regulator [16]. The "steam ready" pilot
light [14] turns off during the steam ironing and turns on
during the interval when it is not used.
• During the ironing do not place the smoothing iron
temperature regulator [20] below the area that indicates
the steam, or else some water could come out from the
smoothing iron plate.
• During the ironing without steam it is necessary to place
the smoothing iron temperature regulator [20] according
to the type of cloth to iron.
12:28 Page 32
Fig. 15
If during ironing it is necessary to top up the water, opera-
te as follows:
• The water missing pilot light [15] turns on. Turn off the
steam generator by means of the ON/OFF switch [13].
• Let the steam comes out by pressing the steam emission
button [21]. Turn off the smoothing iron by means of the
switch [12].
• Turn off the ironing board by means of the switches [5]
and [6] and disconnect the pin. Press the safety cap [11]
down and open it of half turn carefully (so the present
pressure can come out).
ATTENTION:
After a long use of the station, the cap could be very hot.
Let the station cools or use a cloth to unscrew the cap.
• Let the station cools for two minutes, top up the water
and restart the station.
32