White&Brown MAMBO DB 716 Mode D'emploi page 20

All manuals and user guides at all-guides.com
notice_DB716 25/04/06
• Do not place wet or humid cloths to dry on the hot ironing board
because condensate can appear.
Attention! The replaced smoothing iron is hot. Burning risk
occurs if it is not correctly used.
• The product contains steam under pressure. Never open the safety
cap! it is necessary to read first the "commissioning" indications.
Attention! In case of faulty or lost safety cap, it only can be
replaced with an original one.
• When topping up the steam generator it is absolutely necessary to
disconnect the ironing board from the power line. Do not expose the
product to atmosheric agents.
• For the cleaning, disconnect first the pin, then let the product cools
and clean the surface with an humid cloth.
• Never unhook the locking handle of the board height regulation (10),
while the smoothing iron is on the supporting base. It could fall down
and the ironing board could close.
12:28 Page 20
Attention!
Do not touch the electrical cables with the smoothing iron hot
plate.
Disconnect the supply cable:
-every time you go out from the room
-before any cleaning and maintenance operation
-before the boiler topping up
-after use
• Do not use the steam complete ironing station when the
product, the supply cable or the connection cable are
damaged. If the supply cable of the smoothing iron and/or
steam station steam is damaged call the authorized customer
service. Any wear signs of the supply cable winding
material are normal and do not damage.
• Do not leave the product unattended while it is connected
to the electric line.
• An electrical product is not a toy for children. Use and
keep the steam complete ironing station away from
children. Do not let the connecting cable hangs down.
• Do not introduce any object into the product openings.
• Take the supply cable directly from the pin and do not pull it.
• The smoothing iron hot surface, in particular the inferior part,
and the bodies of the steam station and ironing board, can be
very hot in special conditions.
Avoid touching them.
20