White&Brown MAMBO DB 716 Mode D'emploi page 30

All manuals and user guides at all-guides.com
notice_DB716 25/04/06
It is suggested to top up the water before every ironing. This permits
to avoid the waiting times for the topping up during ironing.
12:28 Page 30
Fig. 6
• Turn on first the smoothing iron switch [12] and then the
boiler starting switch [13].
Follow the sequence correctly.
• Then wait few minutes until the green pilot light of "steam
ready" [14] is on.
Attention: the steam station can be started only when in the
boiler there is enough water (but max 1,0l.)
Fig. 7
• Place the smoothing iron temperature regulator [20] on the
level near the steam symbol (Fig. 8).
• When the pilot light [22] turns off, the smoothing iron can be
used. By pressing the steam emission button [21], the steam
comes out from the smoothing iron plate.
• The ironing board with steam active suctioning and the steam
station with the steam smoothing iron can be used separately.
Fig. 9
• Fix the smoothing iron on the base by means of the fixing
belt [23].
• Activate the closing hook on the front edge of the steam
station [24] and slide it along the sliding bars.
30
Acetate, acrylic, nylon, polyester, rayon
Silk
Wool, cotton, fine linen Cotton, linen,
starched clothes