White&Brown MAMBO DB 716 Mode D'emploi page 31

All manuals and user guides at all-guides.com
notice_DB716 25/04/06 12:28 Page 31
Fig. 10
• Introduce the supply cable pin [1] into a socket.
• To start the resistance and the steam active suction of the
ironing board, operate as previously described. At this point
the ironing board can also be used with a traditional steam
smoothing iron.
Fig. 11
• To use the steam steam station separately from the ironing
board, introduce the pin into a socket directly and then
operate as described previously.
• To use it correctly, it is necessary that the steam station is
in a balance position!
Fig. 12
• To use once again the ironing board and the steam station
together, activate its closing hook and push it along the
sliding bars of the ironing board until the hook is fixed.
Fig. 13
• During the smoothing iron first starting, a formation
of smoke and a light smell of burn can be considered as
normal. The reason is the adjustment of the gaskets and
material according to the temperature. For this reason it is
suggested to do not direct the first steam blasts toward the
cloth to iron, but toward another cloth.
• During the ironing some drops of water with steam can
come out because the correct temperature has not be
reached yet or because there is condensate water into
the feed hose.
• To reach a good ironing level it is suggested to press the
steam button [21] intermittently to vaporize and dry the
cloth. Dampen the cloths with steam and fix them without
steam.
31