NuVinci Nfinity 330 Mode D'emploi page 5

2.3 Adjusting Cable Slack
All controller related explanations show for
the C8 controller apply to all other controllers.
•
Cable slack can be adjusted with the
barrel adjusters (C) at the shifter.
•
Cable slack can be determined by pulling
lightly on the cable housing (D) at the
shifter and noticing any slack.
- 0.5mm of slack is ideal. Cable slack of
more than 2.0mm may cause decreased
shift performance and shift cable durability.
•
For rear wheel removal, additional cable
slack may be desired to ease shift cable
hardware removal, which can be obtained
with the barrel adjusters.
TECHNICAL OWNER MANUAL
C
D
0,5mm
NFINITY OPERATION & CARE
EN
5