NuVinci Nfinity 330 Mode D'emploi page 11

3.3 Nfinity Hub Interface Compatibility
TM
6.6 Harmony Hub Interface
TM
& Orientation
Compatibility & Orientation
1. Ensure you have the correct Nfinity Hub
Interface for your NuVinci Optimized CVP.
•
N330 CVPs have a yellow dot (A), and
TM
are compatible with Nfinity 330 Hub
Interfaces designated with a light grey
interior (B).
•
N360, N380 and N380SE CVPs have
a black colored shift driver (C), and are
compatible only with Nfinity 380 Hub
Interfaces designated with a black interior
(D).
2. Use the uninstalled Nfinity Hub Interface (E)
to determine the desired orientation
•
Typical orientation is forward, parallel to
the chain stay or seat stay cable routing.
•
Move the Nfinity Hub Interface along the
dropout to ensure clearance at different
axle positions.
3. With the Nfinity Hub Interface oriented
correctly inside the right dropout, the
installation angle (F) is the indicated
angle of the dropout (20 degrees in this
example).
•
Use the markings on the Nfinity Hub
Interface to determine your approximate
installation angle.
TECHNICAL OWNER MANUAL
N330 CVP
A
N360/N380/N380SE CVP
C
Standard Shifter One-Turn Shifter
0°
E
Image can differ from product based on product variant
Nfinity 330 Hub Interface
compatible
B
Nfinity 380/N380SE Hub Interface
compatible
D
Image can differ from product based on
product variant
0 -> 0°
1 ->15°
2 ->30°
3 ->50°
4 ->75°
5 ->90°
NFINITY ASSEMBLY OF COMPONENTS

N330 and
!
N360/ N380/
N380SE series
CVPs have different shift
0°
driver configurations, and
20°
F
are compatible only with
the appropriate Nfinity Hub
Interface. Do not attempt
to fit incorrect Nfinity Hub
EN
11