Function Buttons; Setting Mode; Audible Signals - AEG FAVORIT 55010 VI Notice D'utilisation

64
Control panel

Function buttons

The following functions can be set with the help of these buttons:
• setting of the water softener,
• cancel a washing programme or a delay start in progress,
• activation/deactivation of Multi-tab function
• activation/deactivation of the rinse aid dispenser when Multi-tab function is active,
• activation/deactivation of the audible signals.

Setting mode

The appliance is in setting mode when all programme lights are illuminated and in the
display 3 horizontal lines are visible.
Always remember that when performing operations such as:
• selecting a washing programme
• setting the water softener
• activating/deactivating the MULTITAB function
• activating/deactivating the rinse aid dispenser
• activating/deactivating the audible signals
the appliance MUST be in setting mode.
If a programme light is illuminated and in the display 1 horizontal line is visible, the last
performed programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress: Simultaneously press and hold
the two RESET buttons (B and C) until all the programme button lights illuminate. The
programme has been cancelled and the machine is now in setting mode.

Audible signals

Audible signals have been introduced to help indicate which operations the appliance is
performing:
• setting the water softener
• end of the washing programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons.
Deactivation/activation of the audible signals
1. Press the On/Off button. The appliance must be in setting mode.
2. Press and hold buttons B and C until the light of the buttons A, B and C start flashing.
3. Press button C, the lights of buttons A and B turn off while the light of button C goes
on flashing. At the same time the End of programme indicator light illuminates in-
dicating that the audible signals are active.
4. To deactivate the audible signals press again the button C: the End of programme
light turns off indicating that the audible signals have been deactivated.
5. To memorize the operation, switch off the dishwasher.
6. To activate again the audible signals, simply follow the above operations until the End
of programme indicator light illuminates.