Renkforce CR-1035 Mode D'emploi page 85

All manuals and user guides at all-guides.com
m) "MIC" function
A microphone (7) is integrated in the top of the clock radio. You can use it to record voice notes
etc.
• Press the "MENU" button (9) to display the main menu.
• Select the "MIC" function by turning the control wheel (2) and press the "SNOOZE" button
(3) to confirm.
Setting sample rate and volume for the recording
• Press the "SNOOZE" button (3) again. Then use the control wheel (2) to select between
"QUALITY" (sample rate) and "VOLUME" (recording volume).
• Press the "SNOOZE" button (3) to set the desired value using the control wheel (2). Then
press the "SNOOZE" button (3) to confirm.
• Press the "" button (1) to go back to the previous menu.
Recording (start, pause, stop)
• With the display in normal mode (i.e. not in the sample rate and volume settings), press the
"/ " button (6) to start recording.
• Press the "/ " button (6) again to pause or resume recording.
• Press the "" button (1) to stop recording.
Use the control wheel (2) to select "YES" (save recording) or "NO" (do not save recording)
in the confirmation box and press the "SNOOZE" button (3) to confirm.
• You can now proceed to record something else as described above.
If the clock radio is not recording, press the "" button (1) to exit recording mode and display
the main menu again.
71