Renkforce CR-1035 Mode D'emploi page 73

All manuals and user guides at all-guides.com
After selecting the item using the control wheel (2), press the "SNOOZE" button (3).
For Europe, select "Europe" as the reception area using the control wheel (2). Press the
"SNOOZE" button (3) to confirm.
Press the "" button (1) to go back to the previous menu.
"FM RECORD": Recording radio broadcasts
After selecting the item using the control wheel (2), press the "SNOOZE" button (3) to activate
recording mode for radio broadcasts.
Setting sample rate and volume for the recording
• Press the "SNOOZE" button (3) again. Then use the control wheel (2) to select between
"QUALITY" (sample rate) and "VOLUME" (recording volume).
• Press the "SNOOZE" button (3) to set the desired value using the control wheel (2). Then
press the "SNOOZE" button (3) to confirm.
• Press the "" button (1) to go back to the previous menu.
Recording (start, pause, stop)
• With the display in normal mode (i.e. not in the sample rate and volume settings), press the
"/ " button (6) to start recording.
• Press the "/ " button (6) again to pause or resume recording.
• Press the "" button (1) to stop recording.
Use the control wheel (2) to select "YES" (save recording) or "NO" (do not save recording)
in the confirmation box and press the "SNOOZE" button (3) to confirm.
• You can now proceed to record another radio broadcast as described above.
If the clock radio is not recording, press the "" button (1) to exit recording mode and display
the frequency again.
61