Renkforce CR-1035 Mode D'emploi page 84

All manuals and user guides at all-guides.com
While the video is running, the following options are available:
• If you have not watched the video file to the end the last time you played it, "LAST PLAY?"
is displayed?
Use the "   " button (4) or the "    " button (5) to select "NO" (video file will be played from
the beginning) or "YES" (video file will be played from where it was interrupted last). Press
the "SNOOZE" button (3) to confirm.
• Adjust the volume using the control wheel (2).
• Press the "   " button (4) or the "    " button (5) to play the previous or the next video file.
• Hold down the "   " button (4) or the "    " button (5) for fast backward or fast forward.
• Press the "" button (1) to stop the video and display a list of all video files (integrated file
manager, see above).
• Press the "SNOOZE" button (3) while a video file is played to open another menu with the
following options:
"SELECT TIME PLAY": This option allows you to specify at what position the video should
start. Use the "   " button (4) or the "    " button (5) to switch between hour settings and
minute settings. Use the control wheel (2) to make adjustments. Press the "SNOOZE" button
(3) to confirm the settings and to start the video at the specified position.
"LCD EXPAND": Depending on the video, try "NORMAL" or "FULL SCREEN" so that the
picture is shown in the correct proportions. However, the displayed picture also depends on
the aspect ratio of the video. Therefore, switching between "NORMAL" and "FULL SCREEN"
might not always affect the displayed format.
70
Operating manual

English