ENGLISH (Original instructions)
TABLE OF CONTENTS
ASSEMBLY ....................................................... 7
SPECIFICATIONS
Model:
Dimensions: length x width x height
(without cutting tool)
Net weight
Cutting diameter
Gear ratio
•
Due to our continuing program of research and development, the specifications herein are sub-
ject to change without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Approved power unit
This attachment is approved to use only with the
following power unit(s):
EM405MP, EM406MP:
•
EX2650LH Multi function power head
•
DUX60 Cordless multi function power head
•
XUX01 Cordless multi function power head
EM403MP, EM404MP:
•
EX2650LH Multi function power head
* In countries other than US and Canada, they
can be used in conjunction with DUX60. In US
and Canada they cannot be used with DUX60 or
XUX01 due to the regulation.
WARNING:
Never use the attachment
with non-approved power unit. Non-approved
combination may cause serious injury.
Symbols
The following symbols are used on the attachment and
this instruction manual. Understand these definitions.
Take Particular care and
attention!
Metal blade
Nylon cutting head
OPERATION ....................................................11
MAINTENANCE ...............................................11
EM403MP EM404MP EM405MP EM406MP
876 mm x 392 mm x 225 mm
(34-1/2" x 15-1/2" x 8-7/8")
1.5 kg
(3.3 lbs)
230 mm
(9")
14:19
13:21
Read instruction manual.
Wear protective helmet, eye and
ear protection!
Protective gloves must be worn!
Wear sturdy boots with nonslip
soles. Steeltoed safety boots
are recommended!
Keep bystanders at least 15 m
15m(50
)
FT
(50 ft) away.
Flying object hazard!
Kickback!
Top permissible tool speed
For EM405MP and EM406MP
only
Never use metal blade.
2
ENGLISH
876 mm x 187 mm x 232 mm
(34-1/2" x 7-3/8" x 9-1/8")
1.3 kg
(2.8 lbs)
-
420 mm
(16.5")
14:19
13:21