Tripp-Lite U442-DOCK20-B Manuel De L'utilisateur page 7

Installation
1. Connect the host computer or laptop to the U442-DOCK20-B
using the included USB-C to C cable. Use the USB-A to C
adapter if necessary.
Note: Your source device will only charge when using a USB-C to C
cable.
2. Connect up to two HDMI-compliant displays to the
U442-DOCK20-B using Tripp Lite's P569-Series cable
(sold separately).
Note: Up to three screens can be extended in a multi-monitor
configuration. Manipulate the orientation or mode of the displays
(mirror or extend) through the host computer's display settings.
3. Connect up to three USB 3.0 peripherals such as a keyboard,
mouse, flash drive or smartphone.
Note: The Front Panel USB port labeled BC 1.2 supports fast
charging up to 1.5A and Apple Charge up to 2.4A.
4. Connect to a wired Gigabit LAN using Tripp Lite's N201-Series
Cat6 Cable (sold separately) if Wi-Fi signals are weak or
unavailable.
5. Connect headphones to the available 3.5 mm port.
Note: If no sound is output, the audio output source must be
changed to USB audio.
6. (Optional) Lock and secure your U442-DOCK20-B docking
station to your desk using the K-LOCK port located on the side
of the unit.
7. Connect the included power supply to the docking station and
power on the unit using the power button located to the left
of the DC port.
20-06-034-Book.indb 7 20-06-034-Book.indb 7
7
7/8/2021 11:31:46 AM 7/8/2021 11:31:46 AM