Setting The Timer - Teac SR-L250i Manuel Du Propriétaire

ALARM 1, ALARM 2
< The unit can be set two different timer setting
separately.
< Adjust the clock before setting the timer (see page
15).

Setting the timer

1
Press and hold the ALARM 1 or ALARM 2
button for more than 2 seconds to display
"ON".
The clock and the Timer indicator (
blinks on the display.
< If no button is pressed for about 8 seconds, the
timer setting mode will be cancelled.
Press the SKIP button (. or /) to set the
2
hour, and then press the ALARM 1 or ALARM 2
button.
Press the SKIP button (. or /) to set the
3
minute, and then press the ALARM 1 or
ALARM 2 button.
Now the on time is set.
"OFF" and the off time value blink.
32
Timer 1
/
or )
Press the SKIP button (. or /) to set the
4
hour, and then press the ALARM 1 or ALARM 2
button.
Press the SKIP button (. or /) to set the
5
minute, and then press the ALARM 1 or
ALARM 2 button.
Now the off time is set.
The source blinks.
6 Select a source (CD, USB, TUNER or iPod) using
the SKIP button (. or /), and then press
the ALARM 1 or ALARM 2 button.
7 Set the volume using the SKIP button
(. or /), and then press the ALARM 1 or
ALARM 2 button.
The volume for timer operation is adjustable from
10 to max.
Setting the timer is now completed.