Teac SR-L250i Manuel Du Propriétaire page 30

The Radio Data System (RDS) is a broadcasting service
which allows stations to send additional information
along with the regular radio programme signal.
RDS works on the FM waveband in Europe only.
1 Tune in an FM RDS station (see page 28).
The RDS indicator lights and the Programme Service
name (station's name) appears on the display.
2
Press the RDS button.
Each time the RDS button is pressed, the RDS mode is
changed as follows:
PS (Programme Service name)
When you select PS, the frequency will be displayed
for 3 seconds, and then PS (station's name) will be
displayed. If there is no PS data, "NO PS" will be
displayed.
PTY (Programme Type)
When you select PTY, the programme type will be
displayed.
The PTY indicator will light on the display.
If there is no PTY data, "NO PTY" will be displayed.
RT (Radio Text)
When you select RT, the news of stations
composed of up to 64 symbols will be displayed.
The RT indicator will light on the display.
If there is no RT data, "NO TEXT" will be displayed.
30
RDS
RDS Clock Time (CT)
The clock setting will be automatically adjusted
according to the CT data.
If you tune in an RDS station broadcasting incorrect
CT data, the clock might be wrongly adjusted, and
that may eventually affect the timer operation.
No matter which RDS mode is selected, the unit
receives CT data and adjusts the clock.
To turn on or off the CT mode, press and hold
the RDS button for more than 3 seconds, then
press the SKIP button (. or /) to select
on or off.