Setting The Timer; Timer 1 - Teac SL-D950 Manuel Du Propriétaire

ALARM 1, ALARM 2
< The unit can be set two different timer setting
separately.
< Adjust the clock before setting the timer (see page
13).

Setting the timer

1 Press and hold the ALARM 1 or ALARM 2
button for more than 2 seconds to display "ON
TIME".
The clock and the Timer indicator (
blinks on the display.
< If no button is pressed for about 8 seconds, the
timer setting mode will be cancelled.
2 Press the TIME button (‡/°) or turn the
MULTI JOG knob, to set the hour, and then
press the ALARM 1 or ALARM 2 button.
3
Press the TIME button (‡/°) or turn the
MULTI JOG knob, to set the minute, and then
press the ALARM 1 or ALARM 2 button.
Now the on time is set.
"OFF TIME" and the off time value blink.
30
TIME MULTI JOG
or

Timer 1

4 Press the TIME button (‡/°) or turn the
MULTI JOG knob, to set the hour, and then
press the ALARM 1 or ALARM 2 button.
5 Press the TIME button (‡/°) or turn the
MULTI JOG knob, to set the minute, and then
press the ALARM 1 or ALARM 2 button.
Now the off time is set.
The source blinks.
6
Select a source (CD, USB, TUNER or iPod) using
the TIME button (‡/°) or the MULTI JOG
knob, and then press the ALARM 1 or ALARM
2 button.
)
7
Set the volume using the TIME button (‡/°)
or the MULTI JOG knob, and then press the
ALARM 1 or ALARM 2 button.
The volume for timer operation is adjustable from
10 to MAX (40).
Setting the timer is now completed.