Preparing For Use - Miele S 6210 Mode D'emploi

en
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.

Preparing for use

Attaching the suction hose (dia. 1)
^ Insert the hose connector into the
socket on the vacuum cleaner until it
clicks into position. To do this, line up
the guides on the two pieces.
Removing the suction hose (dia. 2)
^ Press the release buttons at the side
of the hose connector and lift the
hose from the socket.
Connecting the handle to the suction
hose (dia. 3)
^ Insert the suction hose into the handle
until it clicks into position.
Connecting the handle to the suction
tube (dia. 4)
^ Insert the handle into the telescopic /
triscopic suction tube until it clicks
into position. To do this, line up the
guides on the two pieces.
^ To release the handle from the
suction tube, press the release
button and pull the handle away from
the tube.
Your vacuum cleaner is fitted with one
of the following telescopic tubes,
depending on the model:
– Telescopic tube
– Triscopic tube
34
All manuals and user guides at all-guides.com
Adjusting the telescopic suction tube
(dia. 5)
One part of the telescopic tube is
packed inside the other and can be
adjusted to suit your height for
comfortable vacuum cleaning.
^ Press the release button to release
Adjusting the triscopic suction tube
(dia. 6)
The triscopic tube has three sections.
Two sections are packed together
inside a third outer tube.
a Press the release button to release
b Press the release button to release
Fitting the floorhead (dia. 7)
^ Push the suction tube into the
^ To release the floorhead from the
the tubes and adjust to the required
height.
the lower tube and pull it right out
until it clicks. Press the button again
when you want to retract the tube.
The tube will click into place.
the tubes and adjust to the required
height.
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
suction tube, press the release
button and pull the suction tube away
from the floorhead.