Oneida Air Systems DUST GORILLA PRO XGK030105H-S35VP Mode D'emploi page 25

Optional Ductwork
Now you can make the infinite adjustments to fit any length requirement.
The exclusive adjustability of our fittings makes Gorilla Duct™ the clamp-
together duct that is infinitely adjustable. All fittings (elbows, branches,
reducers... anything with a collar) will accept a cut piece of pipe just the
same as a nipple. Our 11" long adjustable nipple is recommended for
adjustments between fittings. To use this feature follow the directions
below, but cut the pipe a little longer than needed. Slide the cut pipe into
the fitting and clamp the O-ring to the fitting.
Note: Keep cut end of pipe in the same direction as the airflow.
1
Measure length needed.
4
Deburr cut and slide nipple
(A) over cut end of pipe (B).
All manuals and user guides at all-guides.com
Infinite Adjustability
Adjustable, Fast Installation
2
Mark standard 5' duct 3 - 4"
shorter than length needed.
5
Adjust to length.
24
Made in the USA
3
Use O-ring (comes with nipple)
to mark cut line. Cut.
6
Clamp ends of assembly and
then clamp O-ring to nipple.