Setting Up The Network Card; Naming Your Computer - Dynex DX-E201 Guide De L'utilisateur

All manuals and user guides at all-guides.com
Dynex5x7-multi.book Page 7 Thursday, September 8, 2005 11:07 AM

Setting up the network card

Setting up the network card

Naming your computer

To name your computer and workgroup:
1 Click Start, right-click Network Places, then click Properties. The System
Properties dialog box opens.
2 Click the Identification tab.
3 If you want to name your computer or change your computer's name, type a
new name in the Computer name box. Each computer name on your
network must be unique. The computer' s name should be 15 characters or
less with no spaces.
4 If you want to enter a workgroup name, type the name in the Workgroup
box. The workgroup name must be identical for all computers on your
network.
5 If you want to add an optional description for your computer, type the
description in the Computer Description box.
6 Click OK.
7 Repeat this process for each computer on your network to make sure that
they all have a unique computer name and identical workgroup name.
7