Assigning A Static Ip Address - Dynex DX-E201 Guide De L'utilisateur

All manuals and user guides at all-guides.com
Dynex5x7-multi.book Page 12 Thursday, September 8, 2005 11:07 AM
12
4 Click the IP Address tab, then click Select Obtain an IP Address
Automatically.
5 Click OK. The Network Properties window opens again.
6 Click OK. When Windows asks you to restart, click Yes to complete
configuration of the Dynamic IP Address.

Assigning a static IP address

Note: DHCP (Dynamic Host Configuration Protocol) automatically assigns IP
addresses to computers on a network. If you have a DHCP-capable router, you
do not need to assign IP addresses.
To assign a static IP address:
1 Click Start, Settings, then click Control Panel. The Control Panel window
opens.
Setting up the network card