Features; Networking Basics - Dynex DX-E201 Guide De L'utilisateur

All manuals and user guides at all-guides.com
Dynex5x7-multi.book Page 6 Thursday, September 8, 2005 11:07 AM
6

Features

• 100 MBps and 10 MBps data rates in compliance with IEEE 802.3/ 802.3u
(The 100 indicator shows that the data transmission rate is at a fast 100
MBps and the 10 indicator shows that the data transmission rate is at 10
MBps)
• Ethernet 100Base-TX and 10Base-T PCMCIA PC Card Standard version 2.0
and newer
• PCMCIA standard 68-pin front-end connector
• 15-pin back-end connector for media coupler
• Full-duplex capable in 10 MBps and 100 MBps modes
• Auto-negotiation per IEEE 802.3u specification
• No manual setup switches –– fully automatic configuration Laser-welded
stainless steel case
• RJ-45 connector with auto-detection of network speed
• Software support:
• Diagnostic program
• Windows XP/2000/ME/98SE

Networking basics

F E
AST THERNET
Fast Ethernet is a network technology specified by IEEE Standard 802.3u that
extends the traditional 10 MBps (10 megabit/sec) Ethernet technology to achieve
100 MBps (100 megabit/sec) transmission and reception. Because Fast Ethernet
retains the traditional Ethernet CSMA/CD (Carrier Sense, Multiple Access, and
Collision Detect) protocol, it remains wholly compatible with 10 MBps Ethernet
while providing a tenfold increase in network capacity.
A -
UTO NEGOTIATION
Auto-negotiation controls the cable when a connection is established to a
network device. Auto-negotiation detects the various modes that exist in the
device and automatically configures it to the highest performance mode of
operation.
Product components