Connecting A "Playstation 2 - Sony RHT-G800 Mode D'emploi

Connecting a "PlayStation 2"

Connect this stand to a "PlayStation 2" using the
INPUT OPT jack.
To Video In jack
Video signal
To Video Out jack
A Optical cable (not supplied)
Setting up a "PlayStation 2"
Refer to the operating instructions supplied with
"PlayStation 2."
1
Select "Audio Setup" on "Setup."
2
Select "Audio Digital Out."
3
Set "Digital Out (Optical)" to "On."
20
US
TV
A
Audio signal
"PlayStation 2"
Connect the AC power cord (mains lead) last.
* "PlayStation 2" is a trademark of Sony Computer
Entertainment Inc.
l : Signal flow
4
Set "Dolby Digital" to "On."
5
Set "DTS" to "On."
Note
• Connect the "PlayStation 3" to the stand using an
HDMI cable. For details on various settings, refer to
the operating instructions supplied with the
"PlayStation 3."