Connecting A Dvd/Blu-Ray Disc Player (Recorder) - Sony RHT-G800 Mode D'emploi

Connecting a DVD/Blu-ray Disc player (recorder)

Connect this stand to a DVD, Blu-ray Disc
player (recorder) using the INPUT OPT jack.
To Video In jack
Video signal
To Video Out jack
A Optical cable (not supplied)
Setting up a Sony DVD player
(recorder)
Refer to the operating instructions supplied with
each component.
1
Select "Audio" on the setup display.
2
Set "Audio DRC" to "Wide Range."
3
Set "Digital Out" to "On."
18
US
TV
A
Audio signal
DVD/Blu-ray Disc player (recorder)
Connect the AC power cord (mains lead) last.
l : Signal flow
4
Set "Dolby Digital" to "Dolby Digital."
5
Set "DTS" to "On" or "DTS" (depending
on model).
Note
• Set up the audio format of the playback disc to listen
to multi-channel sound.