ClickTronic 60809 Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
All manuals and user guides at all-guides.com
Auto switching function operation mode:
For first connection, the Full HD switch will detect
and connect the first available source by the
following sequence:
Source 1
For changing the source, only turn on the source
device you want to use. The Full HD switch will
automatically switch to the source device, you
turned on.
Auto switching mode control:
You can set the auto switching function OFF.
Press the SELECT/AUTO button for 3 seconds to
turn off the auto switching function. Press ano-
ther 3 seconds to turn it back on.
Manual operation mode:
• Use the POWER button to switch on or off the
power.
• Use the SELECT/AUTO button for manual
switching. If you want to change the input
channel, you can only press the button once.
There will be a LED indication for the active
channel. The procedure is a cyclic function.
3D video format:
Frame packing:
1920 x 1080p@23.98/24 Hz
1280 x 720p@59.94/60 Hz
1280 x 720p@50 Hz
Side-by-Side (Half):
1920 x 1080i@59.94/60 Hz
1920 x 1080i@50 Hz
Top-and-Bottom:
1920 x 1080p@23.98/24 Hz
1280 x 720p@59.94/60 Hz
1280 x 720p@50 Hz
3D application:
1. Ensure all devices (HDTVs, Receivers, cables,
Blu-Ray
formats.
2. If a device supports no 3D, on all devices 2D
will be displayed.
14
Source 2
Source 3
Players, etc.) support the same 3D
TM
Source 4
Source 5
Source 6
Clicktronic®

Publicité

Table des Matières
loading

Table des Matières