Table des Matières
Publicité
Maintenance and Service
Clean the laminator at regular intervals and as necessary.
Cleaning the Housing
1
Switch the power switch to OFF.
2
Disconnect the power plug from the power socket.
Caution!
Risk of burns through hot machine surface!
The laminator heats up during hot lamination. Wait a few minutes after switching off until
the laminator has cooled down before you touch it.
Important!
Risk of property damage through cleaning agents and solvents. Do not use any solvents or clean-
ing agents.
3
Clean the surface of the housing with a soft, slightly moist, lint-free cloth.
Î The surface of the laminator has been cleaned.
- 25 -
EN
Publicité
Table des Matières
