Table des Matières
Publicité
EN
Positioning and Starting Up the Laminator
The following section should help when starting up the laminator.
1
Set the laminator down on a level, stable working surface close to an easily accessible power
socket.
2
Switch the power switch to OFF.
Only use the power cable supplied.
3
Connect the power cable to the connection socket in the laminator.
4
Connect the power plug to a power socket.
5
Switch the power switch to ON.
Î The transport rollers start to rotate.
Î The "COLD" status LED lights up GREEN
6
Fold out the pouch tray (lid).
Î The laminator has been put into operation.
- 18 -
Publicité
Table des Matières
