Important User Information; Preparation For Use - Numatic M-Class Mode D'emploi

IMPORTANT USER INFORMATION

Before use operators shall be provided with information, instruction and training for the use of the machine
and the substances for which it is to be used, including the safe method of disposing of material collected.
The dust container has to be emptied when necessary, but also after every time used.
This vacuum cleaner has a lamp that illuminates when air velocity drops below a < 20 m/s, which
indicates that the bag must be changed.
All filters including the bag must be undamaged and in correct position before this machine can be used
safely.
Extraction from electric power tools can be controlled by an integral automatic electronic switch-on /
shut-off - Auto Start Feature
WARNING:
1. This machine must only be operated by suitably trained and authorised personnel.
2. This machine or its accessories must not be modified.
3. The machine must not be stored or used in a wet environment.
4. Do not allow the dust collection bag (NVM-2BH) to become so full as to reduce the effective
pick-up of the vacuum. (Lamp will illuminate at preset air velocity levels < 20 m/s).
5. Only use the dust collection bag (NVM-2BH) once.
6. This machine must only be repaired by suitably trained and authorised personnel.
7. Only use genuine Numatic International Ltd spare parts, for repairs.
8. This machine must not be installed as a fixed extraction system or run unattended.
9. Do not re-use the essential filter element after removal out of the machine.
Operators should observe any safety regulations appropriate to materials being handled.
This machine is for dry use only.

PREPARATION FOR USE

Unpack and identify each item of equipment from the delivery note.
Check that the details given match the information on the "rating plate" mounted on the head assembly.
1
Label Explained
1 M type Vacuum Cleaner
2 Caution, debris contained inside the vacuum cleaner could be hazardous to health
3 Caution!
4 Read instructions before use
Warning!
This machine contains dust hazardous to health. Empting and maintenance operations, including removal
of the dust bag, must only be carried out by trained personnel, who are familiar with the machine and
wearing suitable personal protective equipment. DO NOT operate without the full filtration system fitted.
For M class machines, outside of the machine should be decontaminated by vacuum cleaning methods
and wiped clean or treated with sealant before being taken out of a hazardous area.
Installation / Removal / Disposal of the dust bag/ cartridge filter.
The dust bag/ cartridge filter holding the dust and debris must be removed and renewed by authorised
personnel only, wearing appropriate personnel protective equipment, in a specified de-contamination area.
Never operate without the full filtration system in place.
Remove the cloth filter in the drum. Remove the dust bag from the hose flange inside the drum and seal
the dust bag hole. Place the dust bag cartridge filter inside an impervious plastic bag and seal the bag.
Dispose of the plastic bag, depending on contamination, in an appropriate manner.
2 3 4
1