Important User Information; Preparation For Use - Numatic HZ 190 Mode D'emploi

IMPORTANT USER INFORMATION

Before use operators shall be provided with information, instruction and training for the use of the
machine and the substances for which it is to be used, including the safe method of disposing of
material collected.
The dust container has to be emptied when necessary, but also after every time used.
This vacuum cleaner has a lamp that illuminates when air velocity drops below a pre-set level, which
indicates that the bag must be changed.
This machine is not suitable for connection with dust generating machines.
All filters including the bag must be undamaged and in correct position before this machine can be
used safely.
CAUTION: This machine is for dry use only and is not to be used or stored outdoors in wet
conditions.
Do not pick up glowing embers or dust or any other ignition hazard.
Do not use the power cable as a method of moving the machine.
WARNING:
1. This machine must only be operated by suitably trained and authorised personnel.
2. This machine or its accessories must not be modified.
3. The machine must not be stored or used in a wet environment.
4. Do not allow the dust collection bag (NVM-4B) to become so full as to reduce the
effective pick-up of the vacuum. (Lamp will illuminate at pre-set air velocity levels).
5. Only use the dust collection bag (NVM-4B) once.
6. This machine must only be repaired by suitably trained and authorised personnel.
7. Only use genuine Numatic International Ltd spare parts, for repairs.
8. This machine must not be installed as a fixed extraction system or run unattended.
Do not re-use the essential filter element after removal out of the machine.
Operators should observe any safety regulations appropriate to materials being handled.
Do not allow the mains lead to come in contact with rotating brushes.
This machine is for dry use only.

PREPARATION FOR USE

Unpack and identify each item of equipment from the delivery note.
Check that the details given match the information on the "rating plate" mounted on the Head
Assembly.
Note*
Your machine exhaust can be used as a blower, simply remove the air diffuser and replace with the
hose on to the exhaust port.
The blower function is not intended for blowing away deposited dust.
Nominal Over pressure: 100 mbar (hPa)
17
P/N 210990