All manuals and user guides at all-guides.com
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme
for the type of load and the degree of
soil.
9.1 Using the detergent
D
A B
30
20
A
B
D
30
20
1. Press the release button (B) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (D).
4. Close the lid. Make sure that the
release button locks into position.
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
• After 5 minutes if the programme has
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
C
3. Press repeatedly
C
The display will show the programme
number for approximately 3 seconds and
then show the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the
Starting a programme with delay
start
1. Set a programme.
2. Press
The delay indicator comes on.
3. Close the appliance door to start the
programme.
not started.
appliance. Make sure that the
appliance is in programme selection
mode.
until the display
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
• If you want to select the
MyFavourite programme, press
.
– The indicators of the options
related to the MyFavourite
programme come on.
programme.
again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
countdown.
13
ENGLISH