Starting A Programme - Electrolux ESF5201LOW Notice D'utilisation

Masquer les pouces Voir aussi pour ESF5201LOW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
www.electrolux.com
8.1 Using the detergent
D
A B
A
30
1. Press the release button (B) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (D).
4. Close the lid. Make sure that the
release button locks into position.
8.2 Using the multi-tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser.
1. Adjust the water softener to the
lowest level.
2. Set the rinse aid dispenser to the
lowest position.
30
20
C
B
D
20
C
8.3 Setting and starting a
programme

Starting a programme

1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the
programme you want to set.
• On/off indicator comes on.
• Start indicator starts to flash.
4. Press Start.
• The programme starts and the
indicator of the washing phase is
on.
• On/off indicator and start indicator
are on.
Starting a programme with
delay start
1. Set the programme.
2. Press Delay to delay the start of the
programme of 3 hours.
The delay indicator comes on.
3. Press Start.
Start indicator comes on.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
Cancelling the delay start while
the countdown operates
1. Press and hold Start and Delay until
the start indicator starts to flash.
2. Press Start to start the programme.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Esf5201lox

Table des Matières