UNITEC Climate W010 Manuel De L'utilisateur page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAX/MIN MEMORY
Press "MEM" 5 button to view max & min memory
of temperature & humidity. To clear Max/Min memo-
ry, press "CLEAR" 6 button during Max/Min Display
ALARM 1, ALARM 2 SETTING
Select AL 1 or AL 2 (K) bby pressing the AL 7 key.
Then hold "AL" 7 for 3 seconds. Press "+ 3, – 4"
to enter the desired value and press "AL" 7 to
confi rm setting.
To view alarm time 1 and 2, simply press "AL" 7
button to read AL 1 and AL 2. The alarm time will
display for 5 seconds and resume to normal clock
(M) thereafter.
To turn AL 1, AL 2 (K) on and off, press " + 3 (bell)"
button. The unit will provide Crescendo alarm which
last for 2 minutes.
SPECIFICATIONS
Range of temperature measurement:
Indoor unit:
Remote sensor:
Temperature Accuracy:
Humidity Accuracy:
Transmission:
Resolution:
Clock:
Power for main unit:
Type of battery in main unit:
Power for remote sensor:
Type of battery in remote sensor:
English
313514_Manual.indd 10
All manuals and user guides at all-guides.com
-5 C to 50 C (32F to 122F)
20% to 99% RH
-20 C to 60 C (14F to 140F)
20% to 99% RH
+/- 1 C in the range of 0C ~ 50C
+/- 1.5 C in other range
+/- 5% in the range of 40% ~ 80%
+/- 8% in the range of 30~40% or 80%~ 95%
N/A below 30% or above 95%
30M (100 ft.) open area, RF433 MHz
0.1 degree C, 1%RH
Quartz precision +-45 sec per month when out of RCC
2 x 1,5 V
2 x AA / LR6 / AM3
2 x 1,5 V
2 x AAA / LR03 / AM4
SNOOZE ALARM
During alarm sound, either press „LIGHT/ Zz" 8
button to trigger snooze alarm, or press another but-
ton (AL 7, SET 2, + 3 or - 4) to stop the alarm for
1day. If snooze function is activated, „Zz" and the
bell icon (K) will keep fl ashing. At that moment, eit-
her wait for 5 minutes and the alarm will be turned
on again, or press another button (AL 7, SET 2, +
3 or - 4) to disable the snooze function.
LOW BATTERY INDICATION
Low battery indication is available for the home unit
(G) itself and of the remote channel (F). Replace the
batteries and follow the setup procedure as menti-
oned in this instruction manual.
10
20.12.12 10:45

Publicité

Table des Matières
loading

Table des Matières