Environmental Protection - Evolution 063-0001 Manuel D'instructions

MAINTENANCE
Note: Any maintenance must be carried out with the machine
switched off and disconnected from the power supply.
There are no user serviceable parts in this machine. If a fault is
suspected the machine should be returned to an authorised
service centre for checking and possible repair.
• All motor bearings in this machine are lubricated for life.
No further lubrication is required.
• Use a clean, slightly damp cloth to clean the plastic parts of
the machine. Do not use solvents or similar products which
could damage the plastic parts.
• Keep all ventilation slots clean and free from dust or
debris build up.
WARNING: Do not attempt to clean by inserting pointed objects
through openings in the machines casings etc. The machines air
vents should be cleaned using compressed dry air.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
www.evolutionpowertools.com
14