SEL BLUE
1. Important information
This usage manual contains the essential information needed to install and run the salt water
chlorinator. It is therefore required to read these instructions carefully and follow them before
beginning to assemble the device. Always keep this manual on hand for any later reference needed to
operate your device.
Risk of electrical shock. All of the electric connections must necessarily be installed by a
qualified electrician and must be compliant with standard NFC 15-100 (Edition of Year 2002)
Recommendations
This device was not designed for use by individuals (including children) whose physical, sensory or mental abilities
are reduced, or individuals lacking experience or knowledge, unless they are able to benefit, by way of a person
responsible for their safety, from surveillance or the requisite instructions regarding the device's use (NF EN 60335-
1/A1).
Your device has reached the end of its life span. If you wish to dispose of the device or replace it, do not throw it
into the trash or into your community's selective sorting bins.
This symbol on a brand-new device means that the unit must not be discarded and that it is subject to
selective collection aimed at its reuse, recycling or recovery. If it contains substances which are potentially
dangerous to the environment, they must be eliminated or neutralised.
Warnings:
This salt water chlorinator is for exclusive use in salt water swimming pools.
The device as a whole must be installed and handled by a qualified professional in accordance with the
manufacturer instructions.
The installer is responsible for the device's installation and for adhering to the rules in force.
The use and handling of the chlorinator must be performed by a qualified professional.
The device is designed for operation only at 230Vac, 50/60Hz.
The case must be placed at a sufficient distance from the swimming pool so as to comply with the
regulatory distances required in each country. (NF C 15-100 >3.5m)
The manufacturer denies all responsibility for any damage or malfunctions caused by replacement parts
other than original parts made by the manufacturer itself.
All manuals and user guides at all-guides.com
Donate to a social interest entity
Return the used device to the distributor at the time of a new purchase
Discard the used device at a waste disposal site
The "EC" conformity declaration was established in accordance with Directive
89/336/EEC on electromagnetic compatibility and Directive 2006/95/EC regarding the
safety requirements for electrical materials.
"This device is compliant with standards IEC/EN 60335 AND IEC/EN 61326."
The unit must be installed in an installation that is compliant with the requirements
established in CEI 60364-1 and NFC15-100 (in France).
21
ENGLISH