Display Setting - RCA RTB1016WE Manuel De L'utilisateur

All manuals and user guides at all-guides.com
The Settings Menu
IP Setting
Use or button to select Auto or Manual, then
press OK button.
• Auto — Automatically obtain an IP address.
• Manual — Lets you manually confi gure network
settings, such as IP Address, Subnet mask, Default
Gateway, DNS1 and DNS2 settings.
Wireless Setting
1. Use or button to select Wireless Setting,
and then press OK to confi rm.
2. Press or select Scan or Manual or Auto
to set.
BD-Live Connection
• Permitted — Allows Internet access with valid
"BDLive" network access approval.
• Prohibited — Never allows BD-Live Internet
access.

Display Setting

1. Press the SETUP button to display the Home
Menu while in full stop mode.
2. Press or button to select Display Setting.
3. When fi nished with your Menu selections, press
the SETUP button to exit Home Menu.
Use cursor button to move focus,
use "OK" button to select
TV
1. In the Display Setting menu, press
to select TV.
2. Press button and press
an option, then press OK button.
3. Press or buttons to select the desired
option, and then press OK button to confi rm
your selection.
4. Press button to go to the previous menu.
TV Screen
16:9 Full, 16:9 Pillarbox, 4:3 Pan and Scan, and 4:3
Letterbox are available for your choice.
16 : 9 Full
• High-defi nition 16:9 formatted video will be
displayed correctly on a wide-screen TV (most
modern TVs).
16 : 9 Pillarbox
• The video will be "squeezed" between two vertical
columns on TV screen. This will cause standard-
defi nition 4:3 video to be displayed correctly on
an wide-screen TV, but will distort 16:9 video.
4 : 3 Pan and Scan
• When high-defi nition 16:9 video is played, this
mode clips the right and left sides of the video so
that it can be viewed with correct aspect ratio on
an older analog TV that has 4:3 aspect ratio. This
setting will distort video played on a wide-screen
TV.
• Some wide-screen DVDs that do not permit Pan
Scan mode playback are automatically played in
letterbox mode (black bands that appear at the
top and bottom of the screen).
4 : 3 Letterbox
• When high-defi nition 16:9 video is played in this
mode on an analog 4:3 aspect-ratio TV, black
bands appear at the top and bottom of the
screen.
• This will cause high-defi nition 16:9 video to be
displayed correctly on a 4:3 screen but will distort
standard-defi nition 4:3 video displayed on a 4:3
screen, and will distort video played on a wide-
screen TV.
Notes:
• The displayable picture size is preset on the DVD.
Therefore the playback picture of some DVDs may
SETUP
not conform to the picture size selected.
• If your TV is 16:9 wide-screen (most modern
TVs are) , then choose either "16:9 Full" or "16:9
or button
Pillarbox". If your TV is 4:3 (an older analog TV),
then choose "4:3 Pan and Scan" or "4:3 Letterbox".
or button to select
HDMI Resolution
You can defi ne the video output resolution in this
option.
Auto: If your TV is a high-defi nition TV (HDTV), is
EN - 21
connected to the HDMI jack on your player
and you want your player to set the output
resolution based on information exchanged
between the TV and your player over the
HDMI cable.