Network Settings - RCA RTB1016WE Manuel De L'utilisateur

The Settings Menu
Screen Saver
This Blu-ray disc player has a screen saver feature
when your player is inactive. You can set it to On or
Off to turn on/off the screen saver.
Restore Default Settings
If you choose OK in the prompt message box and
press OK button, all settings will be restored to the
factory defaults.
Upgrade
This option allows to update your product software
via a Disc, USB Drive or Network.
We recommend you periodically check for upgrades.
If upgrading using a Disc or USB Flash Drive, please
visit www.RCAav.com to check for and download
upgrade.
Easy Setup
1. In the System menu of General Settings, press
button, then use or
Setup, and then press OK to confi rm.
2. Press OK to perform Easy Setup.
Follow the on-screen instructions to customize
the following settings to your preference:
• Player Menu Language
(English/French/Spanish)
• HDMI Resolution
(Auto, 480i, 480p, 720p, 1080i or 1080p)
• Aspect Ratio
(16:9 Full, 16:9 Pillarbox, 4:3 Pan & Scan or 4:3
Letterbox)
3. After setting, press OK to confirm and exit the
Easy Setup.
Note:
When turned on for the fi rst time or after resetting it
to the factory default, the Easy Setup menu will pop
up. Please follow above steps to fi nish the setup.
VUDU
If you choose Yes in the prompt message box and
press OK button, you will deactivate the unit's VUDU
registration.
Netfl ix Info
If you choose Yes in the prompt message box
and press OK button, you will deactivate the unit's
NETFLIX registration.
All manuals and user guides at all-guides.com
Language
1. In the General Setting menu, press
2. Press button and press
3. Press
4. Press button to go to the previous menu.
button to select Easy

Network Settings

1. In the General Setting menu, press
2. Press button to select an option, then press OK
3. Press
4. Press button to go to the previous menu.
Interface
Use
OK button.
Information
Displays the Network Connection Information.
Connection Test
Selecting the Connection Test will cause the
player to attempt to communicate with your home
network, and if successful, with a known internet
address. If both attempts are successful, your
network connection should be good. If the player
can successfully connect to your home network,
but not to the known internet address, your internet
service may be "down", or your security fi rewall may
be blocking access of the player to the internet.
EN - 20
button to select Language.
an option, then press OK button.
or button to select the language you
want for Player Menus, Disc Menus, Audio and
Subtitles, then press OK button to confi rm your
selections.
Notes
• If the selected language is not available on a
disc, the disc's language will be used instead.
• If the language chosen is available, it is
automatically selected when you display
the subtitles or press SUBTITLE button on
the remote control. Otherwise, the subtitle
language indicated on the disc is selected.
button to select Network.
button.
or buttons to select the desired
option, and then press OK button to confi rm
your selection.
button to select Wired or Wireless, then press
or
or button to select
or