Hilti SF 2-A Mode D'emploi page 31

2 Description
2.1 Use of the product as directed
The SF 2­A and SFD 2­A are hand-held cordless drill / drivers for driving
and removing screws and drilling in steel, wood and plastic.
Working on materials hazardous to the health (e.g.
permissible.
en
Do not use the battery as a power source for other unspecified appliances.
Modification of the power tool or tampering with its parts is not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning
operation, care and maintenance.
The power tool is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel.
personnel must be informed of any special hazards that may be encountered.
The power tool and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
The working environment may be as follows: construction site, workshop,
renovation, conversion or new construction.
2.2 Chuck
The SF 2-A has a keyless chuck and the SFD 2-A features a hex. socket drive.
2.3 Switches
Control switch with electronic speed control
Gear selector switch
Forward / reverse selector switch with transport lock
Torque and drilling mode setting ring
2.4 Grips
Vibration-absorbing grip
2.5 The items supplied include (toolbox versions):
1 Power tool
1 Operating instructions
1 Hilti toolbox
28
Printed: 24.03.2014 | Doc-Nr: PUB / 5174884 / 000 / 00
All manuals and user guides at all-guides.com
asbestos) is not
This