Settings - MACHEREY-NAGEL Nanocolor T-Set Mode D'emploi

3.7 Settings

With this program item, existing settings on the equipment
can be checked and edited.
The temperature and time tables are divided into two
sections. In the grey-shaded cells the temperatures and
heating times are set by the manufacturer and cannot be
changed. In the white cells, the user can input his own
settings, or the existing values can be amended. The tem-
perature values must be entered as whole numbers; the
time values in the form of hh:mm.
The „Factory Data" box contains the serial number and the
software version number.
In the „Sound" box, the periodic signal tone that is sounded
at the completion of a heating program, can be switched
On or Off. If the signal tone is switched off, at the end of a
heating program only 2 long signal tones are heard.
In the box „Error Log", faults or errors are recorded. This
is a read-only field. The information given can be of help
in locating faults when problems arise. Using the „Write"
button, the settings on the screen can be written into the
memory of the unit.
Disposal in accordance with EU directive 2002/96/EC
In compliance with EU directive 2002/96/EC,
MACHEREY-NAGEL will accept back and dis-
pose of the old instrument at no cost.
ATTENTION!
It is not allowed to dispose of the instrument
using municipal waste disposal services.
Please talk to your local MACHEREY-NAGEL
contact.
19