Handling And Operation; Switch The Device On/Off; Display Charge Level - SilverCrest SLS 2200 C2 Mode D'emploi

Handling and operation

Switch the device on/off
Switching on
♦ Press the ON/OFF button
The charge level LEDs
The LED
is being charged.
Automatic switch-off
♦ If no device is connected for charging within 10 seconds, the
charger switches off automatically to conserve its battery.
Switching off
♦ Press and hold the ON/OFF button
to switch off the device and stop the charging process.
The LED

Display charge level

♦ Press the ON/OFF button
of the non-loaded battery for a few seconds. The charge level
LEDs show you the charge level.
Charge level LEDs
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED is flashing
All LEDs off
SLS 2200 C2
All manuals and user guides at all-guides.com
briefly to switch on the device.
light up for about 10 seconds.
lights up blue as long as a connected device
goes out.
briefly to show the charge level
for at least 3 seconds
Charge level
75 -100 %
50 - 74 %
25 - 49 %
5 - 24 %
< 5 %
0 %
│ 73
GB
■