SilverCrest SLS 2200 C2 Mode D'emploi page 73

Variant B
Variant B is suitable for attaching the device to a pane of glass.
♦ Attach the four suction cups
shown in "Figure B".
♦ Push the suction cups
♦ Now fasten the suction cups
openings.
♦ Now mount the brackets
pushing the retaining lugs into the corresponding slots on the
rear of the device and locking them in place.
Figure B
♦ You can now attach the device to a pane of glass using the
suction cups
■ 70 │
GB
All manuals and user guides at all-guides.com
to the two brackets
into the large holes.
by sliding them into the narrow
on the underside of the device by
.
, as
SLS 2200 C2