Rola 59516 Mode D'emploi page 3

WIRING INSTALLATION INSTRUCTIONS
4. Route the 3-way plug labeled "left" from under the cargo tray, and up
through the steel mesh directly behind the tail lamp housing on the
driver side of the cargo tray.
5. Plug the harness into the back of the tail lamp housing.
6. Route the other wire under the cargo tray, and over the passenger side
tail lamp. Repeat step 5 for this plug.
7. Secure the harness with cable ties to the bottom of the tray
8. Route 4-flat plug to the front of the tray and avoid any locations that
could cut or pinch the wires.
9. Plug into vehicle trailer wiring harness.
PAGE 3 59516_IN Rev C • Questions? (800) 234-6992 • RolaProducts.com