Publicité
Les langues disponibles
Les langues disponibles
WIRING INSTALLATION INSTRUCTIONS
PARTS LIST
6- 8½" Cable Ties
3- 14½" Cable Ties
3 Prong Wiring Pigtails
1. Place grommets into opening on rear of cargo tray on each side.
2. Check to make sure the grommet is seated correctly from the inside
of the cargo tray.
3. Firmly press tail lamp housings into grommets on both sides of
cargo tray. Rear of grommet should be fully seated as shown below.
This is important for holding the light securely.
Standard 4-Way Flat
Wiring Harness
PAGE 2
59516_IN Rev C • Questions? (800) 234-6992 • RolaProducts.com
Grommets
Waterproof LED Lights
Publicité
