Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
7.5
NEUTRAL BYPASS KNOB
1. Pull the neutral bypass knobs outwards and then
downwards to unlock the wheel.
2. Move the neutral bypass knobs back into position to lock
the wheels.
Never drive mower with the neutral bypass knob working.
Always install the neutral bypass knob to the original
position before driving! Failure to re-install the knob could
cause serious damage to your mower and void mower
warranty!
Never pull the neutral bypass lever outside when the
machine is working on the slope!
WARNING
WARNING
English
8
UNPACK THE MACHINE
Make sure that you correctly assemble the machine before
use.
•
If parts of the machine are damaged, do not use the
machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
For your personal safety, do not insert battery before the
tool is assembled completely.
9
INSTALL THE SEAT
1. Place the seat assembly over the mounting brackets and
align holes as shown.
2. Connect the seat plug to the machine.
10
WARNING
WARNING
WARNING
Seat plug
Washer
Nut
Sleeve
Publicité
Table des Matières
