Beko GN163220 Mode D'emploi page 31

Masquer les pouces Voir aussi pour GN163220:
Table des Matières

Publicité

Operating the product
5.16. Using the water dispenser
*optional
C
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
C
If the water dispenser is not used for a long
period of time, dispose of first few glasses
of water to obtain fresh water.
During initial use, you will have to wait
approximately 12 hours for the water to cool down.
To take water from the display, first select the
water option, then obtain the water by pulling the
trigger.
Take out the glass a little while after you pull the
trigger.
5.17. Drip tray
*optional
Water that dripped while using the water dispenser
accumulates in the spillage tray. You can remove
spillage tray by pulling it to yourself or pressing on
its edge (depending on the model). Remove the
water with a sponge or a soft cloth.
30 / 35 EN
Refrigerator / User Manual

Publicité

Table des Matières
loading

Table des Matières