Table des Matières
Publicité
Installation
3.13. Connecting the water
hose to demijohn
(This feature is optional)
To make the water supply connection between
the refrigerator and the demijohn, you must use
a water pump. Follow the instructions below after
connecting one end of the water hose coming out
of the pump to the refrigerator.
1. Complete the connection by pushing the other
end of the water hose into the water hose inlet of
the pump.
2. Put and fix the pump hose into the demijohn.
3. After completing the connection, plug in and run
the pump.
C
After the pump starts to operate, wait for
2-3 minutes to allow it attain the required
efficiency.
C
You can refer to the user manual of the
pump while making the water connection.
C
There is no need to use water filter if you
will be using a demijohn.
Refrigerator / User Manual
13 / 35 EN
Publicité
Table des Matières
