Install The Hood - Best U102I Mode D'emploi

INSTALL THE HOOD

(DUCTED AND NON-DUCTED HOODS)
NOTE: At least three people will be required to
mount the hood.
1. Raise the hood up into the wall cabinet. Adjust
brackets to contact inside walls of the cabinet.
2. Make sure the front edge of the hood drawer
support is aligned with the front of the wall
cabinet. Center the hood on the wall cabinet.
3. Tighten the (4) mounting bracket machine
screws previously installed.
4. Fasten the hood to the cabinet with (8) 4.2 x
15mm pan head screws.
Make sure that screws will not penetrate finished
cabinet side walls.
5. Open the slide out drawer. Place the glass panel
into the open recessed area of the drawer.
6. Slide glass left or right until it is centered in the
opening and securely retained.
- 9 -