Setting The Amount Of Lens Shifting - JVC D-ILA DLA-L20U Manuel D'instructions

Installing the Projector (Cont.)
CAUTIONS and NOTES
• When installing a screen, use a 4:3 aspect-ratio picture.
(A 16:9 aspect-ratio picture is projected based on the width of the range in which a 4:3 aspect-ratio picture is projected.)
• The diagonal length of a 16:9 aspect-ratio screen is about 91.8% that of a 4:3 aspect-ratio screen. This value is only a
guide (reference).
• If sunlight or lamp light strikes the projection screen directly, the picture tends to become whitish and dim. Be sure to use
a curtain, etc. to shield the light.
• Trapezoidal distortion may not be corrected. Set the projector horizontally on a surface that is within the range of adjustable
angles (up/down adjustment angle: +7° ; horizontal adjustment angle: ±1.5°).
• The values listed in table "Relationship between Projection Distances and Projection Screen Sizes" are provided only as
a guide (reference). The projected screen size may vary depending on the manufacturing tolerance of the projection lens.
• When hanging from the ceiling, use a dedicated hanging fixture.

Setting the Amount of Lens Shifting

This projector features a lens shifting function which allows you to shift the projection screen up and down in position.
Depending on installation conditions, you may need to use this function to make adjustments.
Notes
• The amount of shifting is within the range of approx. 30% to 55%. The factory setting is 30%.
• After finishing the lens shift setting (adjustment), tighten the SHIFT LOCK fixing bolt firmly so the lens will not move.
1
Loosen the SHIFT LOCK fixing
bolt.
Use the hex wrench supplied.
2
Rotate the LENS SHIFT knob to ad-
just the position (shift amount) of
the projection screen.
Rotate it to the right: The lens shifts upward.
Rotate it to the left: The lens shifts downward.
3
Tighten the SHIFT LOCK fixing
bolt firmly.
Use the hex wrench supplied.
Projected screen position image by amount of shift
SHIFT LOCK fixing bolt
LENS SHIFT knob
* The projection position can
only shift in an up-and-down
direction.
The illustration shows the
screen shifted sidewise for
the purpose of explanation.
Approx. 55%
Approx. 50%
Approx. 30% (factory setting)
17